do it yourself

DIY – Rattan Side table Upcycle

| The Bee Life

Embarrassingly enough, this upcycle has been 11 months in the making — eeek! Part of it was sheer shelf doubt and being intimidated about using and installing rattan for the first time. On top of that, I did not find too many other DIYs for installing rattan in the way I was going to use it, another stumper, so there was a lot of thinking and planning. Did I mention, I was intimated about installing rattan? Luckily, I finally got over that because, ultimately, I love how this piece came out!

This upcycle was pretty low budget, as I utilized 90% of materials I already owned from previous projects (like my Sideboard Glow Up) — but I’ve linked everything below if you’re a first timer a furniture flip.

Makeover Supplies:
– Rattan (17″ x 3.3′)
– Wood Filler
– Hand Sander
– Liquid Nails
– Wallpaper
– Magnolia Chalk Paint & Wax Sealer
– Round Felt Furniture Pads

My Total Cost: $46 (liquid nails + rattan)

For an 11-month project, this was fairly simple as it was just a paint job and switching out the side panels. One added touch to get rid of some of the gaudy was filling in the detail on the bottom front with wood filler which instantly elevated the piece. I had left over chalk paint and had already worked through the kinks of using Chalk Paint, so I knew what to expect when it came to painting with it — although I still did not LOVE working with chalk paint, I at least knew what to expect. The wax seal definitely helps protect any surfaces that are going to be high-traffic.

Let’s talk about the rattan. Removing the original metal was pretty easy, I just cut it out with wire cutters. The rattan I purchased does recommend soaking prior to use, so I did soak the roll before cutting and installing into the sides of my table. Disclaimer, I don’t think this was the easiest furniture piece to install rattan on and my method definitely wasn’t perfect, but it worked. This table had a framed alcove for the rattan to fit into, so my goal was to utilize some liquid nails to glue into the framed alcove. This was messy and not ideal. I ended up utilizing some dowels with painters tape to keep the rattan in place while everything dried — that definitely helped! Again, this wasn’t perfect, but I didn’t have another way to keep in place, nailing wouldn’t have worked, so I also made sure to try to get as much of the rattan stuffed into the framed alcove as possible for added support.

The final finishing touch was adding in the wallpaper — I had some scraps from the Sideboard makeover that I had planned to use, but then my mother-in-law gave me some wallpaper scraps, which fit this piece so well, so it was a no-brainer to utilize those! I added this to the inside back and then a few pieces on the inside top, just for an added touch. 🤩

This is the perfect little plant stand/side table with space for a little accent decor (thrifted books & a vintage picture of my great-uncle) while still showing off the pop of wallpaper and the classic rattan sides. And I love how it ties into the sideboard and can be used in different spaces around our home as we change things over the seasons. Would you want this piece in your home?

See More of Bee’s Before & Afters: Sideboard Glow Up, Moody Side Entry, & Glam Front Entry

Before & After: Moody Side Entry

| The Bee Life

One of our first spaces we made over in our home was our side entry. Ironically we didn’t use the space much besides going downstairs and rarely used it as a point of entry… until our kitchen renovation. By using it more, our needs for this space changed and it just felt like it was time for a refresh — we wanted to do something a little more bold compared to the rest of the house, we were especially inspired after our glam front entry makeover.

To get this project started and start making decisions, we started curating inspiration and creating a mood board for the space which included a mix of function and design. For shoes, we utilized an 11″ cube storage solution, which also became sort of a dumping ground within each of the bins. Also the shelf and hooks were crammed and small — it all made the space feel tight for an already smaller entry. We weighed the pro’s and con’s and had to lower the wishlist that would be a bit friendlier on the wallet and timeline.

What We Did:
– New paneling on lower half of stairs for a cohesive look – this included wood filler, sanding, caulking, priming & painting.
– We made a custom shelf that was wider with boarder trim that we raised much higher
– Electrical Update: The original light fixture had an exposed wire along the ceiling, so we worked with an electrician friend, cut open the ceiling and the wall to reroute the wiring & ended up installing a new fixture
– We did a lot of painting, which included priming, two different blue colors for our two-tone look, and even painted the ceiling
– New stair runners
– All new organization solutions for the space

BEFORE

Let’s talk budget

As I mentioned, we definitely scaled back some of the plans to try to be more budget friendly – but this project still added up quickly with the wood updates and all of the paint. We ended up priming everything, painting the darker blue and then the light blue, AND THEN the ceiling (which luckily we already had ceiling paint). Lot’s of painting and a lot of time with the wood. Electrical updates are expensive too especially when wire is involved, but this was a nonnegotiable for our project since we wanted to get rid of the wire running along the ceiling! When it comes to doing your own home projects, definitely weigh the pros and cons that make an impact for you and your space. Sometimes that is time and we are willing to spend more to outsource and get it done quicker, than if we were going to do it — and others it’s spending a little more to change something that has always bugged you.

Project Breakdown:
– Paint & Wood: $270
– Decor & Accessories: $250
– Electrical: $140
– 35+ hours of work

TOTAL: $660

My main goal for this space was to be more intentional with built-in finishes, like our custom shelf and wide border trim. I also really wanted to make this a statement like our front entry… wallpaper was honestly a pain for the front entry and super expensive, so that got crossed off the list — causing me to be a bit more creative with the impact. I’ve always loved rooms that are all one color, including the trim, accessories, etc. so I grabbed some paint samples and put some on the walls to see what B and I liked.


It’s amazing to me that by painting this small space a dark color and making a few other design tweaks, this space could feel even bigger than the white and grey space we had before! The custom shelf being raised with the hooks being spaces out is also another reason why this space feels big. Painting the door was another last minute decision that I’m so glad we did, because it really just creates and makes this space complete. I pulled in lighter wood and orange accents to really compliment the blues. We also painted the light switch cover, railing the wall color for a full take over.

Eliminating the cube for our shoes has also been really great, the basket holds my shoes and we switch out seasonal to our front hall closet to what we need here. The same goes for those wooden bins on the shelf, we switch out seasonal items to just what we need, so that we don’t have a catch all — it’s worked out so great and has been easy to maintain. We also have some extra hooks going down into the basement for additional storage and overflow as needed for seasonal/Moz’s items/hats or for guests!

We’ve been living in this space for awhile, I definitely want to hang up some more photos, I considered doing the frames the same color or doing all gold frames for a speak-easy type feel and mix in some vintage and images of things we love for an eclectic feel — still trying to figure out exactly what that might be.


Shop our finishes: brass hooks, wooden bins, shoe basket with lid, accent rug

Anthropologie Holiday Candle Dupe

| The Bee Life

It wouldn’t be the holiday season without another Anthropologie dupe! I did a dupe this year on the Frosted Bottle Brush Tree Candle. This honestly was super easy, with endless options to customize and create your own. Originally these candles are priced anywhere from $68 – $16, these candles I duped were about $14 each or less.

The candles I found were at Home Good’s and Marshall’s by a brand called Sand + Fog, they were $7.99 each but came with painted lids with holiday prints. I also made sure to find holiday scents since I’m gifting them for Christmas gifts! Luckily, I had a decent amount of mini bottle brush trees from previous years, so I only had to buy a few new to create this craft.

DIY Shopping List:
– Candle of your size or choice, ideally with a wooden lid
– Bottle brush trees: 6.5″ Assorted Set OR 6″ Set from Target OR 4″ Set from Target
– Hot glue
– Paint or spray paint as needed

Step-by-Step:
1. If your candle lids have a print on them, paint them white or color of your choice. You may need a few layers depending on the design. If you have a plain wooden top, skip to the next step!
2. Remove the base on your bottle brush trees, and trim off the excess wire with pliers. You’ll want the bottom of your tree as flat as possible.
3. If your bottle brush trees are all the same height, you can take pliers and cut a section off the bottom in order to have different heights.
4. Before gluing in place, play around with the heights and amount of trees you fit on the lid — I fit 3-4 trees depending on the size.
5. Once you have your placement figured out, generously apply hot glue to the center base of your trees and put into place – if your trees are taller, you may need to hold the tree in place.

So Many Brush Bottle Trees, So Little Time. As I mentioned, this can be tailored to your design and style and truly make it your own. I love a little more retro flair with my Christmas decor, so I found these cute retro bulbs and gold trees to mix into a few of my candle tops. On some of the plain green trees, I even added more white paint to make them look like snow-covered — you can also play around with spray painting the trees to whatever color you want. Finally, I do think adding in various heights can help add depth to the candle top, unless all the trees are different like the gold, silver, and white trio at the very top (which is one of my favorite ones!)


What do you think? My anthro dupe is definitely a different vibe than the inspiration, but replicating the originals would’ve been pretty easy to do by sourcing different bottle brush trees. It would be really fun to grab an extra-large candle to create a little bottle brush forest on top!


Check out my other high-end holiday dupes:
❄️ Pottery Barn Snow Globe Place Setting
🎄 Anthropologie Monogram Ornament
🔔 Christmas Village DIY
🎅 Nutcracker Napkin Rings

DIY – Nutcracker Napkin Rings

| The Bee Life

Oversized nutcrackers are definitely all the rage this holiday season if you follow any home DIYers on the gram. I’ve always loved nutcrackers since I was a little girl, and pulling out our nutcrackers each year to decorate was always something I looked forward to doing with my mom. So when I saw these little 2-packs of plain wooden nutcrackers in the Dollar Spot at Target over the fall, I snatched them up and brainstormed fun, easy, and affordable DIY, napkin rings!

The best part of this project is that it maybe cost me $17 to make — if you’re starting from scratch estimated $34 which comes to a little over $4 per table setting, as this makes enough napkin rings for 8 place settings. Which is well under the non-sale price of these similar Crate & Barrel nutrcracker napkin rings that start at $6.95 each.

I had old shower curtains that I utilized and then only ended up buying the blush chalk paint, utilizing other spray paint and colors I had, that would fit into my Christmas decor color scheme.

DIY Shopping List:
– Mini Wooden Nutcrackers | $3 ea.
— This 5 count at Michael’s is a good substitute | $4 ea.
– Metal Circular Shower Rings | $10 – $12
– Hot Glue or E6000 Glue
– Spray Paint – Color(s) of your choice
— Blush Pink Chalk Spray Paint | $8-10
— Metallic Gold Spray Paint | $10
— Olive Grove Chalk Paint | $36 (don’t recommend buying just for this project!)

Once you have everything from there, this DIY project can be pretty simple. You can paint your nutcrackers all the same color, get more intricate and paint faces and detail out their outfits, or you can do a color scheme like I did mixing in your holiday colors. Mine are green, blush, and gold! One thing to make sure you do is to paint the bottoms of your nutcrackers, as that will definitely be a focal point to guests at the table.

Once all your rings and nutcrackers are painted, you’ll want to glue your rings to the back, bottom of the nutcrackers. I utilized hot glue, but recommend E6000 for a better hold that is a bit more durable. Wah-la!

Now you’re hosting holiday ready! The best part about this project is that you can always repaint these in a few years to mix up or adapt to your changing holiday decor and style. I also like these, because they’re smaller to store in your decor.


Check out my snow globe Pottery Barn place setting dupe.

DIY – Sideboard Glow Up

| The Bee Life

I’ve been itching for a DIY project, and as much as I love the looks of our sideboard that transitions seamlessly from our living room to our dining room, our project skills and taste have improved since we first did this project back in 2016. The functionality and size of this piece are ideal, so there was no sense in trying to find and buy something new, we just needed a little glow up. After much brainstorming, I saw @hotpinkpineapples cabinet makeover and was instantly inspired to recreate this beaded look on our doors — the color was just throwing me.

To throw it back to 2016, we found a battered bookcase on the side of the road and added doors to it to create extra storage for glassware, entertaining, and games. The legs on the bookcase have always been questionable, so with this glow up, I also made sure to reinforce and take the time to fix some things overlooked with the first make over – like new legs, reinforcing the bottom, taking the extra time to sand the doors to remove some of the roughness and using wood filler to create a seamless look.

Makeover Supplies:
– 4″ Wooden Legs with Metal Leg Plates
– 25mm Wooden Craft Beads (I got 3 packs)
– 1-inch edging
– Gold Acrylic Pulls
– Wallpaper
– Magnolia Chalk Paint & Wax Sealer
– E6000 Glue
– Wood Filler
– Gold Spray Paint (for the old hinges)

This was my first DIY with Chalk Paint… and let me say, I was not impressed, actually super bummed. I did the chalk paint because it’s supposed to be easy, durable, and little prep. I ended up sanding the old piece for the wood, but never primed anything… and as I was in the finishing touches stage the paint easily chipped off, or was stripped entirely when I was applying the wallpaper all the way down to the original dark wood grain. I wasn’t happy! So I made sure to get the wax to give it that protective finish – I did a couple coats on the high-traffic areas but am not convinced it’ll hold up. I also put contact adhesive shelf liner down inside to help with the chippy chalk paint.

Another learning on this DIY was gluing all the beads on, super easy, but the glue had a lot of leftover cobwebs, which was annoying when it came to finishing/painting – so either be careful or super diligent when you are gluing to avoid unnecessary webs. I am really happy with the 25mm size of the beads with my larger doors, they definitely make a statement!

Since the front was getting a glow-up, the inside also needed a makeover too. I wanted it to be a fun party inside, especially since this holds games, additional glassware, and other entertaining supplies. I think the fun tropical leaf pattern in black, white, and grey is super chic and lots of fun. What do you think?

I’m low-key obsessed with this makeover, and have found a small place for some green in my home with accessories and supporting pieces! Working on this project definitely got my creative juices flowing, it’s amazing when you spend the time creating and making something how that stems into other ideas and thoughts in other aspects of your life. 🥂

DIY – Stair Runner Upgrade

| The Bee Life

Our first project of the year is complete! After being sick most of January, we finally had enough energy to conquer this project which was a quick 3-hour project with a huge impact. After seeing Peony and Honey’s stair runner makeover, the wheels were spinning, but nothing started to move. It wasn’t until we put our removable stair treads back on our bare wooden steps that I was not loving the look anymore! So I did a little extra research, found some runner options, and pitched the idea to B.

We had a two-tiered staircase with a larger landing with bay windows going up to our second floor. So there was some debate about how to treat the landing – which may still be coming, but for now is going to be bare wood floors. Regardless, we needed to get two runners for our project to account for the two runs. We figured out our length needed by measuring the stair height and tread and then multiplying it by the number of steps to get our total length in feet. Oh! And this is definitely a two-person job if anything to help keep the carpet tight while the other staples in place.

DIY Shopping List:
– Runners according to your measure length – we ordered a 2x10ft and a 2x12ft rug
– Electric Staple Gun
– Staples
– Pliers
– Exacto Knife

I was honestly hoping this project would be a little more affordable, but we ended up picking out runners that were more expensive, which drove the majority of the budget. The runners are definitely more plush, which was good for hiding the staples. This one couple, which was part of my research did theirs for $100 – so it’s definitely possible to do this on the cheaper end with some more affordable rugs and different nailing tools. This DIY project was around $360 for us.

Before we got started, I vacuumed and washed the steps with Murphy’s Oil Soap to make sure they were super clean (& dry) before we put the runners on. After all of our construction, they definitely needed it! The smaller of the two stairs took us a little over an hour to get the runner on, and then larger steps, closer to 2-hours because it was a little bigger and these are the main stairs you see from the first floor.

Step-by-Step:
1. First you start at the top of your stair, with the flat end of the rug – make sure it’s centered within your stair with equal length on either side before stapling into place. Stapling along the sides of the rug and top is key to getting it secure!
2. Make sure it’s tight, as you work into both back of your stair to fold over top on the stair topper.
3. Once you get to the first ledge, it’s important to fold over and staple along the length to keep it in place and tight! Ours was tricky because it was very plush, so finding the sweet spot in between the plush was crucial to getting a tight and secure staple in.
4. Basically rinse and repeat down your stairs! You definitely get the hang of it after the first couple of stairs.
5. Once you get to the bottom, get an exacto knife to cut your leftover rug. We put a piece of wood underneath as to not damage our flooring and get a good straight cut across. Using heat along the cut edge will help from fraying – I suggest a heat gun. (We ended up cutting a little longer, and folding under to avoid the fraying).
6. Afterwards, I went back and replaced any staples that were super noticeable, or hid them by adjusting the rug with pliers ever so gently. I also went and reinforced any sides and areas that moved more than I liked.

  • Dog Sitting on Stairs

B and I love how this turned out – and it is definitely an upgrade! As I mentioned, we may add a runner to the landing that matches or update the landing rug on the second floor to match this as well for a little more cohesion. I also feel like we need some new curtains for the bay windows… *immediately opens the Target app*.

DIY – Modern Wooden Fence

| The Bee Life

As we were working through our backyard makeover, one of the curveballs B threw at me was wanting to hide the paint chipping white garage, in addition to adding the raised planter boxes for extra greenery. I instantly jumped on Pinterest searching for inspiration for a decorative solution that we would be able to customize. I searched ‘modern decorate fences’ and found some inspiration that we could easily recreate and pitched the idea to B.
DecoartiveFence(6)The pitch was a success and the project was a go! The advantage of this project and any DIY project is being able to create a completely custom fence that fits your space and dimensions. We ended up throwing in two other fences to place around our ‘property,’ one in front of our garbage cans along the side of our driveway, and then another on the North side of the house in front of our air conditioner. The thing to remember with these fences is they weren’t going to be complete privacy, but help off-set and distract from the ugly things.
DecorativeFence(5)
Project Supply List:
– (13) 1ft x 3ft x 8ft
– (6) 1ft x 2ft x 8ft (post supports for smaller fences)
– (5) 1ft x 6ft x 12ft
– (1) 1ft x 6ft x 6ft
– (2) 2ft x 4ft x 10ft (post supports for large fence)
– Thompson’s WaterSeal Stain & Foam Brush
– Post Hole Digger
– Quick Time Concrete
– Nail Gun / Screw Driver + Screws (large fence)
DecorativeFence(9)
Figuring out the number of pieces of wood and sizes to get and make all three of our fences, was a headache and quite the math equation that B successfully conquered — even though it took us awhile to get there. As I knew I wanted 6″ wide pieces and 3″ wide pieces, I just didn’t have the complete layout and patterned figured out based on the height variations. There has also been a wood shortage this summer, so B had to do some home improvement store hopping to get all the sized pieces we needed — luckily we were able to get everything!

Our Fence Dimensions:
– Back Fence: 7-feet tall* by 4.5-feet wide aka (16) 3″ pieces, (5) 6″ pieces and (2) 1″ pieces
– Garbage Fence: 5-feet tall* by 3-feet wide aka (12) 3″ pieces and (4) 6″ pieces
– Air Conditioner Fence: 3-feet tall* by 3-feet wide aka (8) 3″ pieces and (2) 6″ pieces

*This is the height above ground, we accounted for 1-2ft in the ground depending on the overall height. 

Once we secured our wood, based on our estimations, B cut away to get the estimated pieces per board. Once we had everything cut, I was able to play around with the pattern and get the pieces figured out — it was definitely a move around, take a step back and see what looked and felt right. Once we had our pattern in place it was go time. For the two smaller fences we used a nail gun and getting these put together was relatively quick, as we also just eyed the spacing between each pieces, made sure things were level and fired away.
DecorativeFence(5)
The large fence was a bit different and took some adjustments after we created the two smaller pieces. One adjustment was switching up the support pieces to 2ft x 4ft x 10ft — due to the size and slatted wood pieces, this fence was not only heavy but also pretty big (see me standing with it above), especially accounting for 2-feet to put in the group, it was a bit guy to navigate. We also ended up screwing the large fence together (instead of a nail gun) and did the screwing from the back, so that you wouldn’t see any holes from the front.

When it came to staining, we used the same stain we had from our planter boxes, we had plenty left over to create a cohesive look. I ended up staining the fences two different ways, one with the fences built and one as individual pieces — I’m not sure which I liked better, the individual pieces was definitely a bit more tedious. But, I do know overall I would pick staining any day to painting — it’s so easy and workable to make it blend the way you want. Luckily we were staining in the heat, so they dry time was quick if we wanted to apply two coats.
DecorativeFence(4)
We ended up angling most of these fences for final placement so that more space was covered and we were blocking the ugly things just right. This of course, took a bit of time and tapping to get just right! We also made sure to strategically place the larger back fence in front of the garage, so that form a farther distance you couldn’t see the end of the fence! I think my favorite fence beside the big one, is the one in front of the garbage cans, when you walk into our backyard it’s just such a welcomed look and as we’ve worked on adding flowers along the side it definitely makes it feel more complete!

bee (1)

 

DIY – Painted Cork Board Makeover

| The Bee Life

Whenever we travel back to visit my parents, I always try and snag some of my childhood things to bring back or get rid of! So when I saw my old high school half and half white-cork board, I initially thought I didn’t want or need this — but I still grabbed it and brought it back home. With my new semi-permanent home office, I realized I could definitely use a space to post inspiration, write important to-do’s and hang a calendar, so as the wheels kept turning, I decided this could use a little face lift!
DIYCork(4)The best part was I was able to cover up my high school doodles that have lived on for over a decade *cringes a little* and give the dated wood grain a fresh and affordable update with the craft and paint supplies we already had. It just required a few coats of paint and a little patiences.

Craft Supply List:
– Old Bulletin Board
– Craft Paint, Colors of your Choice
– Foam Painter
– All Purpose Cleaner
– Goo-Gone
– 3M Hangers Strips
DIYCork(1)Step-by-Step:
1. Once you’ve figured out your colors, it’s time to prep the space. I chose to go with a pretty pink and white!
2. Before I started painting, I had to do some cleaning to remove old dry erase phrases that have been sitting on here for over a decade, so upon doing some research I found that an all purpose cleaner would do the trick – and it did. I left the cleaner sit on the dry erase writings for a little bit and then wiped off, I repeated this a few times until it was all clean!
3. I also had some sticky residue on the wood frame, so goo-gone helped clean that up before it was time to paint. It cleaned off well with a little elbow grease and a few scrubs.
DIYCork(2)
4. I wasn’t entirely sure how the craft paint would go on the bulletin board part — but it went on relatively easy and surprisingly helped cover up some of the missing chunks and the written phrases, initials and numbers I had scattered throughout. It just took a few coats, especially where I had writing. I did sadly cover up ‘The O.C.” — RIP.
5. Next, it came time to work on the wooden boarder. I used some white wall paint for this, that had a bit of a gloss. This went on slow, since it did require about 4-5 coats – but it really helped make the pink pop and refreshed to something that would work better in my office space!
6. Once it was all painted, it was time to hang it up! I hung this with 3M strips and it has stayed up well! It’s the perfect space for my monthly calendar and a few other fun reminders. Although — I have not been great about getting my to-do’s crossed off!DIYCork(3)
Since I updated this old cork-white board, we’ve given the office space a bit of an update too — I’m excited to share next week as I’m just waiting for a few pieces to arrive in the main to finish up the gallery wall! The 3M Strips also worked great for already moving the placement already. It’s been great having a monthly overview calendar at a quick glance that has made this update so worth it, on top of having a fun pop of pink!

bee (1)

DIY – Painted Front Doormat

| The Bee Life

This weekend was pretty great, and Saturday was pretty perfect. The sun was shining all day long and the temp was ideal to catch some rays. Meaning we were outside pretty much the entire day. B touched up the paint on the front porch, we got our patio furniture out, got a run in and I even got this fun DIY project done. This painted DIY doormat is an affordable and fun way to add a custom finishing touch to your front door decor.
PaintedDoormat - beelifeblog(2)
Project Supply List:
– Plain Coco Coir Doormat
– Outdoor Acrylic Paint
– Foam Brush Variety Pack
– Satin Polyurethane

Estimated Project Total: $30

Step-by-Step:
– Once you have your supplies secure – which pro-tip you can still order from Michael’s and they’ll bring it out to your car and throw it in the trunk, no human contact.
– Your rugs will most likely come rolled, so make sure you get them flattened out before you craft, I placed some heavy photo albums on the ends for a couple days.

Pro-Tip: If you’re painting the whole back drop of your rug, make sure to grab two of  your background color – I barely had enough pink! Also grab 3-4 bottles of the Polyurethane. Also the assorted foam brush packet had the perfect variety of sizes for the detail of my design, not the best quality but got the job done.
PaintedDoormat - beelifeblog(3)
– Now for the fun! Figure out your design. I found my inspiration from Gradin Road and thought it was totally perfect and a fun pop of spring to add to our front porch! If you’re opting for a phrase with letters you’ll want to get a stencil cut out – a Cricket would be perfect to help customize (I don’t have one of those yet!)

– I hand drew and cut out the body of my bee to help get me started and then free handed the rest of my bee with paint and brushes. But feel free to create stencils and paint as you feel comfortable. I did a lot of dabbing with my foam brushes to make sure the paint covered the mat properly.
PaintedDoormat - beelifeblog(4)
– Once you have your design painted, go over spots with painted to make sure it’s covered and pops as much as you’d like. From there I picked my background color and filled in the rest of the doormat it was a tough decision between pink or green. As I said above, make sure to grab at least two tubes of your background paint, I barely had enough with one of my pink and just barely enough to cover my 30″ x 18″ rug.

– Once you’re happy with your paint coverage and design, it’s time for the final step! Paint your polyurethane over top the entire piece to help seal in the paint. I used two full tubes, but could’ve definitely used at least one or two more – it dries clear so it doesn’t impact your design at all!

There is still time to see how this holds up in the weather — luckily it is on a covered front porch, but definitely gets full sun in the morning. I love how it turned out and layered with a colorful underlay rug to make sure it really pops on the front porch!  I still have another plain rug to paint and create a fun design — I can’t decide if I’ll safe it for the holidays or a funny saying, time will tell!

bee (1)